beautypg.com

Unpacking, Installation & placement – Simaudio 810LP Phono Preamplifier User Manual

Page 7

background image


810LP Reference Dual-Mono Phono Preamplifier

____________________________________________________________________________________

7

Unpacking


The MOON 810LP Phono Preamplifier should be removed from its box with care.

The following accessories should be included inside the box with your phono preamplifier:

9

AC power cable

9

One (1) pen shaped plastic hand tool for making DIP-switch adjustments

9

This owner’s manual

9

Warranty and product registration information (USA and Canada only)


Once the 810LP is unpacked, inspect it thoroughly

and report any damage to your dealer immediately.

We suggest that you keep all of the original

packaging, storing it in a safe, dry place in case

you’re required to transport this product. The

customized packaging is specially designed to

protect the 810LP from any potential damage

during transit.

Please write the serial number of your new MOON 810LP in the space provided below for future reference.

Serial No.: ________________




Installation & Placement

The 810LP is more sensitive than most other types

of audio components to EMI (electro-magnetic

interference) from power supplies and motors.

Consequently, it should be placed at a minimum
distance of 18 inches from power supplies,

turntables, tape decks, AC line filters, etc.

You

should never place another component directly on

top of this phono preamplifier.

It should be placed

on a solid, level surface. You should avoid placing it

near a heat source or inside a closed cabinet that is
not well ventilated as this could compromise the

preamplifier’s performance and reliability.

If the surface you have chosen isn’t perfectly level,

each of the four (4) cones of your 880M are height

adjustable; carefully using your fingers, you can

either raise each leg by turning the cone underneath
clockwise, or lower each leg by turning it

counterclockwise.

We strongly recommend that you leave these cones

mounted to the component at all times for reasons

related to both performance and aesthetics.