40 factory reset – DigiTech RP250 User Manual
Page 46
40
Factory Reset
This function resets the RP250 to its original factory settings. This procedure erases all custom
User presets, and recalibrates the Expression Pedal.
ATTENTION: Performing this function will erase all user-programmed data. All
such data will be lost forever! Be sure you want to erase the memory and start fresh
before continuing with this procedure.
The procedure for performing a Factory Reset is as follows:
1. Press and hold the Store button while powering up the RP250.
2. When the display prompts you with FACrSt, release the Store button, which is now flashing.
3. Press and hold the flashing Store button for 3 seconds until rStOrD appears in the display and
release (The Factory Reset procedure takes approximately 20 seconds). The Expression Pedal
calibration procedure now commences.