DigiTech RP250 User Manual

Page 16

Rear Panel

1 2

4 5

1. Input

Connect your instrument to this high-impedance TS input.

2. Amp / Mixer

This button optimizes the RP250’s outputs for use when plugged into a guitar amp or a mixer/

recording device. When set to Mixer (“In” position), speaker compensation is turned on and the

outputs are optimized for connecting to a mixer, recording device or headphones. When set to

Amp (“Out” position), the outputs are optimized for running directly in to the input of a guitar

amp.

3. Left (Mono) and Right Outputs

Connect the Left (Mono) output to the input of a single amplifier (or mixer input) for mono

operation. Connect the Left and Right outputs to the inputs of 2 amplifiers (or 2 mixer channels)

for stereo operation.