DigiTech RP250 User Manual
Page 34
28
from 0 to 99.
Waveform (X-Edit
TM
only for DigiTech Chorus models) - Selects a waveform: triang,
Sine, or Square.
Flanger
A Flanger uses the same principle as a Chorus but uses a shorter delay time and adds regeneration
(or repeats) to the modulating delay. This results in an exaggerated up and down sweeping motion
to the effect. The RP250 includes the following Flanger Effect models: fLangr (the DigiTech
Flanger), and mxFLgr (based on an MXR
®
Flanger).
Knobs 2, 3, and 4 have the following functions for the Flanger models:
Flanger
Model
Knob 2
(Speed)
Knob 3
(Depth)
Knob 4
(Regen)
P5
(X-Edit
TM
only)
P6
(X-Edit
only)
flangr
Speed
Depth
Regen
Waveform
Level
mxflgr
Speed
Width
Regen
Manual
--
Phaser (PHaser)
A phaser splits the incoming signal, and then changes the phasing of the signal. This signal is then
taken in and out of phase and mixed back in with the original signal. As the phasing changes, differ-
ent frequencies get canceled resulting in a warm sort of twisting sound.
Knobs 2, 3, and 4 have the following functions for the two Phaser models:
Speed - Knob 2 adjusts the rate (Speed) of the modulation. Ranges from 0 to 99.