Royer Labs R-122 - Manual (Page 17)

popping does not necessarily damage the ribbon element but may produce unacceptable
preamplifier overload and could cause damage to speaker systems.
3. Do not expose the microphone to liquids or caustic smoke.
4. Do not expose the microphone to strong alternating electro-magnetic fields, such as the
power transformers in amps, or a hum may result.
5. Use a soft cloth to clean the microphone body. A small amount of denatured alcohol can be
used to remove fingerprints and other stains.
6. Keep metal filings away from the microphone at all times.
7. When not in use, store the microphone in its protective wooden case.
8. Leave disassembly of the microphone to a trained technician. Disassembly of the microphone
will void your warranty. There are no user-serviceable parts inside.
Caution!
Keep recorded tapes, spring-wound watches, and personal credit cards using magnetic coding
away from the microphone to prevent possible damage caused by the transducer’s powerful
magnets.
Features
• Very high overload characteristics – maximum SPL greater than 135dB
• Active electronics offer greatly enhanced output and a constant, optimized impedance to the
ribbon element
• Extremely low residual noise
• Ribbon element is unaffected by heat or humidity
• Absence of high frequency phase distortion
• Excellent phase linearity – even off axis
• Equal sensitivity from front or back of element
• Consistent frequency response regardless of distance
• Compact size
17