ROHO Hybrid Elit cushion - Manual (Page 5)

5
CAUTIONS
s
s
the cushion’s benefits, increasing risk to the skin and other soft tissue. If cushion insert appears
under-inflated or does not appear to be holding air, see Troubleshooting in this manual. If cushion
insert is still not holding air, contact a clinical caregiver, distributor, or ROHO, Inc. immediately.
s
into the cushion insert and will reduce or eliminate the cushion’s benefits, increasing risk to the skin
and other soft tissue.
s
up, and in the rear of the chair, with the foam support in the front, under user's thighs. If the
cover is not used correctly or if the cover is the wrong size, it may reduce or eliminate the cushion’s
benefits and could increase risk to the skin and other soft tissue.
s
seat cushioning products except as indicated in Intended Use section. Doing so will reduce the
cushion’s positioning benefits. DO NOT use the components of the Hybrid Elite separately.
s
products or materials, except as indicated in Intended Use section. Doing so may add to user
instability resulting in falls. Consult with your clinician for proper usage.
s
s
damage the cushion insert and void product’s warranty.
s
insert and the contoured foam. Doing so will reduce product effectiveness.
s
kg).
s
s
when changing altitude of 1,000 feet (300 meters) or greater.
s
cause deflation.
s
s
allow the cushion insert to warm to 72ºF (22ºC). Open air valve(s). Refer to Cover and Cushion
Insert Removal. Roll up the cushion insert and then unroll it until the neoprene is soft and pliable
again. Refer to Cover and Cushion Insert Replacement. Repeat Adjustment Instructions before
using.
s
by the cover’s carrying handle or by holding the cushion base.
s
may degrade materials used in the manufacture of product.
s
and may affect the product performance and invalidate the product warranty. Avoid prolonged
exposure of the cushion to direct sunlight or other sources of ultraviolet light.