Rocktron Utopia B100 - Manual (Page 65)

65
Step 3
3
4 1 2
Step 1
Step 2
Step 4 Press the STORE button at this time to initiate the All Restore procedure and erase
presets 1-64, replacing them with the original factory presets. The display will fl ash
"RESTORED" as the UTOPIA B100 memory is restored.
!! CAUTION !!
This procedure will permanently erase all user presets (1-64)
and replace them with the original factory presets. If you
have altered and stored presets which you do not want to
erase, do not perform the following procedure.
Restoring all factory presets
FACTORY RESTORE
ALL RESTORE 0
Turn the PARAMETER SELECT knob 2 steps clockwise to "ALL RESTORE 0".
A specifi c code number must be entered to restore the UTOPIA B100 memory Use the
PARAMETER ADJUST knob to enter the number "22".
Turn the FUNCTION SELECT knob clockwise to "FACTORY RESTORE".
ALL RESTORE 22
! ! WARNING ! !
Pressing the STORE button at this time will permanently erase all user
presets and replace them with the original factory presets. If you have
altered and stored presets which you do not want to erase, turn the
FUNCTION SELECT control to exit this function.
The display will return to Preset 1
RESTORED