Rocktron Utopia B100 - Manual (Page 63)

63
Step 2 Turn the PARAMETER SELECT knob one step clockwise to the RUN STAT param-
eter.
Step 3
Step 4
Turn the PARAMETER ADJUST knob to select ON for the RUN STAT parameter.
RUN STAT OFF
RUN STAT ON
Turn the PARAMETER SELECT knob one step clockwise to the PEDAL VOLUME
parameter.
Step 5
The PEDAL VOLUME parameter displays the current preset volume as determined
by the pedal position. Move the expression pedal up and down and you will see the
volume values change as the pedal moves.
PEDAL VOLUME 127
You now must store your changes. If you have made any changes to any parameter, the LED
above the "STORE" button will light. Press the STORE button to save the changes you have
made. "STORE AT PRESET" will fl ash intermittently with the current preset. If you would
like to save this change to the current preset, press the STORE button again. To save this ad-
justed preset (and the parameters you have just changed) to a different preset location, use the
PRESET SELECT knob to choose the preset destination and then press the STORE button
again. Note that doing this will "over-write" the preset location you are saving to.
STORE AT PRESET CURRENT PRESET
Pedal Status......continued.............