REFCO GOBI User Manual
Page 4

Right Handed
Left Handed
Fig.1. Screw the backplate to the wall
below the air handler and just
overlapping the outlet hole. Enlarge the
outlet hole if necessary.
3 mm
Fig.2. Cut the drain hose level with the
bottom of the bracket.
Fig.2
Fig.3. Place the GOBI pump on the
mounting posts, feed the power cable
through the air handler outlet hole and
connect the discharge tube.
Fig.3
Fig.4. Slide the filter over the pump inlet
tube and fit the condensate collection
tray onto the backplate.
Fig.4
Fig.5. Slide on the cover and snap into
place.
Fig.5
Installation
The GOBI can be installed on the left or right hand side of the air handler.
The following installation instructions refer to a right handed installation. For left handed
installations swap the positions of the pump and condensate collection tray as shown
below.
GB
3
Fig.1
3mm