RAVE Sports Performance 3 Piece Aluminum SUP Paddle - Manual (Page 7)

Paddle Adjustment
All RAVE paddles come assembled. To adjust the paddle, follow the steps below.
There are two types of adjustment levers on RAVE’s
SUP paddles, the Qwik Snap & the Qwik Levr.
For the Qwik Snap adjuster, pull center section
forward, align a hole to the top of the collar and press
back down to lock it in place.
For the Qwik Levr, lift lever, adjust to desired length
and press lever back down to lock it in place. If you need to increase locking force, simply
twist the lever clockwise when open then lock back down.
When adjusting your paddle generally, the paddle height should be 8-10 inches above the
paddler’s height. Starting with no shoes on and arm raised, your paddle handle should sit in
your palm.
Properly Holding the Paddle
Hold the paddle so the blade is angling towards the front of
the board as shown at right.
Place one hand cupped over the top of the T-handle and
the other hand approximately 2 feet down the shaft or
where it is comfortable.
1 2 3 4
1 2
Qwik Lever
Qwik Snap
Correct Incorrect
7