RAVE Sports Performance 3 Piece Aluminum SUP Paddle - Manual (Page 6)

Leash (Not Included) Installation to SUP Board
Ankle leashes are important to wear if you are an inexperienced paddler, when you are
paddling alone, paddling in windy & wavy weather conditions, or in the surf.
Install the leash by grabbing the end opposite of the ankle strap.
Pinch the small cord and run it through the leash plug located on the topside tail end of your
board.
After the cord has been pulled through the leash plug take the end that straps to your ankle
and run it through the string loop until tight.
How to Attach the Leg Leash to Your Ankle
Open the Velcro ankle attachment and wrap it around each side of your ankle, then overlap
it until snug. Make sure all Velcro flaps are secured.
1 2 3
4 5 6
1
2
3
4 5 6
6