RAVE Sports Spin Wheel w/ Bongo 13 - Manual (Page 8)

panels of the Bongo13 are aligned with the spokes on Spin Wheel.
Step 2
Slide the straps that have the Velcro flaps in through the center opening of
the Bongo13 jump surface loops. (As seen in Step 3)
Step 3
NOTE: One person will need to be underneath the Bongo 13 for this step.
Take the bottom strap and wrap it around the bottom of the tube and feed
it through the stainless steel buckle. Pull down until it is tight. Tie a knot
immediately adjacent to the buckle to prevent any possibility of slippage.
Step 4
When all the straps are tightly cinched down and tied off, fold the two flaps
inward and velcro it together over buckles and straps.
Anchoring
There is one anchor attachment point at the center of the Spin Wheel.
Attach anchor line to the lower ring on swivel. Note: Do not use the
anchor point on the Bongo 13. Attach anchor line only to this swivel
for proper operation. The Spin Wheels
is ready to use.
8