RAVE Sports Spin Wheel w/ Bongo 13 - Manual (Page 6)

Assembling your Spin Wheel™ Track
Inflation
Roll out and unfold the Spin Wheel on flat ground.
Make sure the area is free of rocks, sticks or other sharp
objects that could puncture or damage the product.
We highly recommend using the RAVE High Speed
Inflator/Deflator. It will provide rapid inflation and
deflation. ( Item #01083, not included )
To lock open valve, depress the stem and rotate ¼
turn clockwise. To close valve, depress the stem and
rotate ¼ turn counter-clockwise. The valve stem
should be in the depressed position while inflating.
Replace cap on valve after inflation to ensure air tight
seal.
If you are using the RAVE Sports
High Speed Inflator ( Item
#01083 ), simply lock the adaptor onto the end of the
inflation hose and insert into the valve body. Turn ¼ turn
to lock in place.
NOTE: This inflation adaptor will automatically open
the valve when inserted and will close the valve when removed. You do
not need to manually open/close the valve when using this special
adaptor.
USE the RAVE Air Compressor
valve adaptor provided with the
Spin Wheel to finish inflating
Spin Wheel track to approx. 5
psi min – 8 psi Max. This will be
rigid enough to support 15
users.
OPEN
CLOSE
6