RAVE Sports Spin Wheel w/ Bongo 13 User Manual
Page 13
Repairs
For large holes, tears or seam failures, contact RAVE Sports at 1-800-659-
0790.
Additional repair patches can be found online at www.ravesports.com.
For minor holes and tears:
•
Inflate the product and locate the leak by spraying the tube with mild
soapy water.
•
Determine the hole size and cut a patch 1-2 inches wider than the
diameter of the hole. Make sure all corners of the patch are rounded.
•
Deflate the product and clean the patch and area around the hole
with rubbing alcohol. Let dry completely.
•
READ AND UNDERSTAND THE WARNINGS ON THE GLUE CONTAINER.
•
Apply glue to the patch and the area around the hole. Let the glue dry
until it is tacky to the touch. (About 30 seconds).
•
Lay the product on a flat, hard surface and apply the patch. Working
from the center to the outer edge, rub out any air bubbles between
the patch and the product.
•
Let patch dry for 24 hours before attempting to inflate the product.
13