RODE Microphones Stereo VideoMic Pro - Manual (Page 3)

3.
S P E C I F I C AT I O N S
Acoustic Principle: Pressure gradient
Frequency Range: 40 Hz ~ 20,000 Hz
Frequency Range:
(High Pass Filter) Selectable HPF
@ 75 Hz / -10 dB /octave
Output impedance: 200
Signal to Noise Ratio: 76 dBA
Equivalent Noise: 18 dBA SPL (as per IEC651)
Maximum SPL: 134 dB SPL
Maximum output:
4.2 dBu
(@ 1kHz, 1% THD into 1K  load)
Sensitivity:
-38 dB re 1V/Pa
(12.60 mV @ 94 dB SPL)
± 2 dB @ 1kHz
Dynamic Range: 102 dB SPL
Power requirements: 9 Volt/PP3
Output Connection:
3.5 Stereo mini jack
Tip – left channel
Ring – right channel
Battery Life:
Over 100 hours (alkaline)
Over 10 hours on low battery life
Weight:
115g (0.253lb) without battery
Packed weight: 240g (0.529lb)
Dimension (W x L x H):
66.0mm × 108.0mm ×130.0 mm
(2.598in × 4.251in × 5.118in)
Frequency Response:
High Pass Filter:
0˚
90˚ 270˚
180˚
-2.0
-20.0
-10.0
0.0
-2.0
-4.0
-6.0
-8.0
-10.0
-12.0
-14.0
-16.0
-18.0
-20.0
-22.0
-24.0
-25.0
dB rel. 1V/Pa
+5.0
Frequency:
500 Hz:
1000 Hz:
4000 Hz:
POLAR PATTERN
FREQUENCY RESPONSE