RODE Microphones NTG8 - Manual (Page 7)

- 7 -
• To mount the NTG8 in the supplied SM8
shockmount, insert the base of the microphone
(with the XLR connector) into the rubber opening
closest to the grey cable management clips and
slide the microphone through all four rubber
mount openings.
Some pressure will need to be applied to insert
the microphone, as the openings must be tight to
secure the microphone.
Mounting the NTG8


NTG8 correctly mounted in SM8 shockmount
(note SM8 orientation)
NTG8 incorrectly mounted in SM8 shockmount