Connecting to the camera – RODE Microphones VideoMic Pro User Manual
Page 12
12
Connecting to the camera
The VideoMic Pro has a small cable clip on the underside of the
shock mount to secure the cable in place and prevent any unwanted
movement noise. Simply press your cable into the clip / groove until
the cable is secured in place.
The VideoMic Pro delivers a mic level signal to the video camera via
a stereo mini jack audio lead. The mini jack should be connected to
the camera via the camera’s “audio-in” socket – refer to your video
camera user manual for the location of the socket on your camera
model.
Now that you have the VideoMic Pro securely fastened to your
camera and the audio output lead connected, you can switch the
microphone on and start recording.