RODE Microphones nt1-a - Manual (Page 5)

- 5 -
Features
• Large capsule (1”) with gold-plated membrane
• Cardioid polar pattern
• Ultra-low noise transformerless circuitry
• New, state-of-the-art surface mount electronics
• Heavy-duty satin nickel fi nish
• Monocoque sub-assembly
• Internal shock mounting system
• Gold plated output connectors
• Designed & manufactured in Australia
• Full 10 year guarantee*
Supplying Power
• Connect all cables before applying power to the
microphone and never remove the microphone
cable while the power is connected.
• The NT1-A requires P48 volts or P24 volts phantom
power.
• If the mixer or preamp does not contain this
phantom power requirement, then an external
phantom power supply is needed.
• Some phantom power supplies do not supply the
voltage at which they are rated. If the required
voltage is not supplied, the dynamic range and
general performance of the microphone will be
reduced.
• We strongly suggest the use of a reputable high
quality power supply. Damage caused by a faulty
power supply is not covered by the warranty.
*Online product registration required.