Proctor-Silex Cordless Electric Kettle (white)-K4070Y - Manual (Page 5)

5
7. The kettle will switch off automatically when the water has boiled
or you can manually shut the kettle OFF ( O ) when desired.
IMPORTANT: Ensure that the cordless kettle has switched off
automatically or is switched off manually before removing it from
the base.
8. Unplug kettle before pouring.
9. If you want to refill kettle immediately, first check the
water level indicator and then, if required, run cold water in through
the spout.
10. After use, unplug the kettle and empty.
11. Do not hold the switch on while the kettle is boiling.
If Your Kettle Boils Dry
The kettle element is protected by an automatic safety device. If the
kettle is accidentally switched on without water, or is allowed to boil dry,
the kettle will automatically repeat a cycle of switching off, cooling down,
and switching back on. If this happens, you should:
1.
Unplug the kettle.
2. Wait about 20 minutes for the element to cool down and then use
as normal and check that the kettle functions correctly.