Proctor-Silex Cordless Electric Kettle (white)-K4070Y - Manual (Page 4)

Using the Automatic Kettle
Before First Use: Fill kettle to maximum capacity, bring to a boil, then
manually shut off the kettle. Discard water and repeat. Rinse well.
NOTES:
• Use water only in the kettle. If used for foods or
beverages such as tea or coffee, the warranty will be voided.
• For increased efficiency and longer life the kettle must be kept clean of
mineral deposits. We recommend that you empty the kettle after each
use to prevent mineral deposits.
1. Unplug kettle before filling.
2. Fill kettle with desired amount of water. Make sure to cover the ele-
ment. The water level must be between minimum and maximum
indicator lines on the water level indicator.
Burn Hazard. If kettle is overfilled there is a risk
that boiling water may spit out of the spout.
NOTE: This kettle has a built-in safety feature for
protection should the unit be plugged in without an
adequate amount of water or if the kettles boil dry.
3. Make sure that the lid is in place and the kettle or power base (cord-
less models only) is standing on a level surface. If the lid is not in
place auto shut-off will not operate.
All kettle cords must be kept away from hot surfaces.
4. For cordless models, ensure kettle is correctly engaged on base.
(See illustration.)
5. Plug in kettle.
6. Switch to ON ( I ) position. A light will
illuminate when the kettle is on.
4
w WARNING