Firmware update, Automatic update – PocketBook SURFpad 3 (7,85") User Manual
Page 43
43
Firmware Update
Official firmware updates for the Device are published on the official Pocket-
Book website
updates is recommended, as they contain fixes and additions improving the
efficiency of the Device.
Official firmware updates do not influence the warranty conditions.
The warranty does not cover software installed from sources other than the
official PocketBook website.
You can update firmware in several ways.
ATTENTION!
Please, make sure the Device is fully charged before updating the firm-
ware to avoid discharge during update process! This may cause severe damage of the
Device’s software.
AUTOMATIC UPDATE
Your Device should be connected to the Internet for this update variant.
1.
Enter
Settings > System > About device > System
updates
section.
2.
If you’d like the Device to check for updates automatically, check
Enable or
disable autoupdate
checkbox
3.
To check for updates immediately, press
Check for the new firmware now
.
If firmware updates are available, the Device will automatically download
and install them.
ATTENTION!
Sometimes a complex of several programs is stored in one pbi package.
To install them after firmware update, please, accept an offer of the pbi package instal-
lation wizard (if it appears automatically) or launch the installation file from the ‘File
Manager’ (see more detailed about pbi packages in the “PBI Packages Support” section).