PocketBook SURFpad 3 (7,85") - Manual (Page 17)

GETTING STARTED
17
In this section you can set whether request or not PIN-code when you are
unlocking the screen, also you can change the SIM-card PIN-code.
NOTE In case when Lock SIM card parameter is on, you will be asked for PIN every time
when you’re unlocking the screen.
Usually mobile network operators pre-configure connection settings (such as
APN) on a SIM-card, so the Device will connect to the network automatically.
ATTENTION! If the Device is connected to Wi-Fi network, it will have higher priority for
data transfer.
If you need to change connection configuration, go to Settings > Wireless &
networks > More > Mobile networks .
• Data connection – turn mobile network connection on or off
• Data roaming – select whether use mobile network connection or not
when you are out of your mobile operator coverage, for example, abroad
• Prefferred networks
• Network mode
– select the most suitable one for your mobile network or
set to auto-detect
• Access Point Name – Internet access points configuration. If you need to
set up one more point, open the section’s menu by Menu hardware key press
and set the parameters provided by your mobile operator
• Network operators – select network operator to connect to. Press Select
automatically to connect to the default network.
After pressing Select manually , the Device will search for available mobile
networks and you will be able to select one. For example, this feature could
be useful when you are in roaming zone – you will be able to select operator
with the lowest rates.
NOTE Consult your mobile network operator about roaming rates.