Inserting micro sd card, Mobile networks connection, Goback – PocketBook SURFpad 3 (7,85") User Manual
Page 16

GETTING STARTED
16
INSERTING MICRO SD CARD
The Device already has 16 GB of internal storage, but you can extend it up
to 2 TB by using micro SD card.
Insert it to the slot, like it
shown on a figure, and
slightly push until card will be
fixed.
To eject the card, slightly press
on its edge until it will be un-
fixed, and pull it to get.
ATTENTION!
Before ejecting microSD card either turn the Device off or unmount it:
go to
Settings > Storage settings > Unmount SD card
. Otherwise the data stored on
microSD card might be damaged.
Sim slot
SD card slot
MOBILE NETWORKS CONNECTION
ATTENTION!
The Device utilizes some services, which don’t ask user’s permission for
Internet access (for example, synchronization). Consult with your mobile operator about
traffic rates.
The Device supports GSM and/or WCDMA mobile networks connection for
Internet access.
ATTENTION!
Before inserting or ejecting SIM-card turn the Device off.
Install your network operator SIM-card, as it is shown on the figure, and turn
the Device on. In case if the card is protected with PIN-code, the Device will
ask you to enter it from on-screen keyboard. PIN-code request settings can
be changed in
Settings > Security > SIM card lock > Set up SIM card lock
.