Pitney Bowes DM575 Series - Manual (Page 161)

DM525™ and DM575™ Series Digital Mailing System Operating Guide
SV62201 Rev. C 9 - 7
Cleaning or
Replacing the
Wick 1. Open the feed cover and lift the E-Z Seal® bottle out of its holder.
2. Remove the Moistener Brush Assembly as described above in Clean-
ing or Replacing the Moistener Brush procedure.
3. Place your finger in the
moistener tank round guide
and pull straight out
towards you.
4. Gently lift the moistener
tank up and out.
CAUTION: The tank may be full of E-Z Seal® liquid
Moistener tank round guide
Moistener tank