Hyundai H-CDM8065 - Manual (Page 14)

14
for about 5 seconds. To stop preset scan, press this button again.
Auto memory store function
Press the A.P button on the panel and hold for 2 seconds to enter auto store mode. The radio will automatically
store the 6 strongest available stations to the 6 preset memories of the current band. To stop auto store, press this
button again.
RDS function
There are the PI, PS, TP, PTY, TA, AF DATA.
PI: Program Identification Code – for identifying code.
PS: Program Service Name Broadcast – station name data expressed in alphanumerically character.
TP: Traffic Program Identification – for traffic information broadcasting station.
TA: Traffic Announcement Identification – showing traffic information is being transmitted or not.
AF: Alternative frequencies – frequency list of broadcasting station transmitting the same program.
TA (Traffic Announcement) function
Press the AF button briefly to switch on/ off mode. When the mode is on symbol “AF” will appear on the display.
If the symbol is blinking, the mode is on, but there is no RDS signal.
Note: The tuner will return to Alternative Frequencies whenever the reception signals getting worse.
“Alarm” will be displayed when an emergency broadcasting is received. Meanwhile sound output level will be
adjusted to the preset output level automatically when the volume control is set at minimum.
PTY (Program Type) function
Press the PTY button to enter PTY mode.
Rotate VOL knob to select the music type the PTY program: NEWS, AFFAIRS, INFO, SPORT, EDUCATE,
DRAMA, CULTURE, SCIENCE, VARIED, POP M, ROCK M, EAST M, LIGHT M, CLASSIC, OTHER M,