Care & maintenance, Caution changing the engine oil – Dixon SPEEDZTR User Manual

Page 38

Hex Head Valve

Stem

CARE & MAINTENANCE

HOT oil may cause burns. Allow engine to
cool before draining oil.

CAUTION

CHANGING THE ENGINE OIL:

1. The “Dapco” oil drain valve is located on the left

side of the engine crankcase.

2. Place a suitable container under the drain valve

hose.

3. To drain, turn hex head valve stem counter-

clockwise with a 10mm wrench or socket. Open
to full open (approximately 7 turns).

4. After engine is drained, tighten hex stem.

5. Change oil filter.

6. Fill with oil (see steps on next page).

NOTE:

Refer to engine manufacturer’s recommenda-
tions for frequency of oil changes.