Operation instructions, Mowing with a grass catcher attachment – Dixon SPEEDZTR User Manual
Page 26
MOWING WITH A GRASS CATCHER
ATTACHMENT:
In order to achieve optimum performance when mowing
with a grass catching attachment, please read and follow
the tips listed below.
1. Set engine speed control to the wide open or full
setting.
2. Do Not Attempt To Cut Grass When It Is Wet.
Wet grass will clog both the underside of the deck
and the attachment chutes. Empty bags often to
prevent plugging.
3. If the grass is tall, place the mower deck cut height
selector in the top or second notch. “Initially” overlap
cutting swaths instead of a full swath with each
pass.
4. Keep The Underside Of The Mower Deck Clean.
Frequent removal of dried grass and dirt will greatly
assist in bagging of the clippings.
5. Maintain Sharp Blade(s) Throughout The Cutting
Season. Some grass catching attachments require
a “high-lift” blade. See your dealer for advice on the
type of blade(s) needed for your mower.
6. Operate the mower at a slower ground speed than
when mowing without a grass catching attachment.
26
OPERATION INSTRUCTIONS