Dixon SPEEDZTR - Manual (Page 29)

GRASS HEIGHT & CUTTING SUGGESTIONS:
Do not attempt to cut grass when it is wet.
If the grass is tall, place the mower deck cut height
lever in the top or second notch. “Initially” overlap
cutting swaths instead of a full swath with each pass.
Some applications may require a second cutting.
Keep the underside of the mower deck clean.
Maintain sharp blades throughout the cutting season.
As a rule of thumb, never cut off more than 1/3 of
the total grass blade length. Correct mowing height
can reduce weeds and disease by 50% to 80%.
The following grass cut heights are based on
adequate moisture conditions and normal thatch
buildup in a healthy lawn. Some locations and
applications may require slightly different cut heights.
If in doubt, consult your local lawn professional for
assistance.
Grass Types Best Cut Heights
Bermudagrass 1 - 2”
Bluegrass 2 - 3”
Buffalograss 1 1/2 -3”
Ryegrass 2 - 3”
Tall Fescue 3-3 1/2 ”
Zoysiagrass 1 - 3”
29
OPERATION INSTRUCTIONS