Parr Instrument DP8340R Series - Manual (Page 20)

– 16 –
CODE ESC @
(1B)
H
(40)
H
FUNCTION Printer initialization
OUTLINE All printing conditions except ESC BEL n
1
n
2
, the line buffer
and data buffer are set to the power on default condition.
CODE ESC BEL n 1 n 2
(1B)
H
(07)
H
n
1
n
2
FUNCTION Sets peripheral unit drive pulse duration.
OUTLINE This command sets the pulse duration for peripheral unit
drive (Paper Cutter, Take-Up Device, cash drawer, etc.)
Pulse Duration = 10
× n
1 (ms)
Delay = 10
× n
2 (ms)
1 n 1 127; 1 n 2 127
Default value: n 1 = n 2 = 20
Executed by BEL code and FS code after printing.
CODE BEL
(07)
H
FUNCTION Trigger peripheral unit drive (Deferred)
OUTLINE Causes a peripheral drive pulse to be generated. This code is
normally stored in the buffer and is performed as it is received
from the data queue.