Wiring diagram - using with dual xdv8125 – Dual XNAV9525 User Manual
Page 9
XNAV9525
GPS NAVIGATION SYSTEM
9
Wiring Diagram - Using with Dual XDV8125
XDV8125 Wiring Notes
When using the XNAV9525 with the Dual XDV8125, please note the only connection
required between the XDV8125 and the XNAV9525 is the 13 pin Interface Cable.
The following connections are not required:
• 4 pin power/speaker connector
• Audio output (RCA connections)
• Video output (RCA connection)
• Remote IR sensor
WARNING:
Do not use the 4 pin power/speaker connector and the 13 pin Interface Cable at the same
time - as possible damage may occur.