N-series isolation poppet valves, 0 installation and use, N-series options – Nor-Cal N-Series Op Lit User Manual
Page 7: 3 valve & options nomenclature, 1 unpacking and detrashing
![background image](/manuals/740015/7/background.png)
7
Call toll free
800-824-4166
or 530-842-4457
•
FAX 530-842-9130
N-Series Isolation Poppet Valves
Air Solenoid
(Optional)
Activation Air Inlet
Piston Seal
Bellows
Valve Body
Poppet O-Ring
Bottom Port
Activation Air Inlet
Standard with 360
o
Swivel
Actuator Cap
Position Sensor Board
(Optional)
Bonnet Seal O-ring
Position Sensor Ring
Closing Springs
Air Cylinder
Side Port
Poppet
Piston
FIGURE 4.2.1
4.3 Valve & Options Nomenclature
Position
Indicator 1
O-ring
Type
Air
Solenoid
Position
Indicator 2
Soft
Start
Valve
Model Number
Example:
NAP-150-NW-O-O-K79-S11-SS
Right angle N-Series valve with 1.5 inch bore, NW-40 flanges, redundant optical
position indicators, Kalrez 4079 O-rings, 120VAC air solenoid and soft start option.
FIGURE 4.3.1
5.0 Installation and Use
5.1 Unpacking and Detrashing
Unless otherwise requested, the N-Series valve is bagged and labeled according to standard clean room protocol. Outer packaging varies depending on the
number and types of valves ordered.
Before unpacking, please inspect the box thoroughly to make sure it is undamaged. Report any obvious signs of damage or tampering to the freight carrier.
Leave plastic bag intact until the product is ready to be transferred to a clean area.
NOTE:
HARD COPY DOCUMENTATION: Printed operating manuals are no longer supplied in the packaging with Nor-Cal valve products. All
product documentation is available on-line at
http://www.n-c.com/productdocumentation.aspx
.
N-Series Options
Please use the following part numbering
tree to add the appropriate options to a
standard N-Series valve model number.