Nor-Cal Linear Gate Valve - Manual (Page 7)

7
Nor-Cal Products, Inc., 1967 South Oregon St., Yreka, CA 96097 • Toll Free 800-824-4166 or 530-842-4457 • www.n-c.com Rev. 1-2013
27. Install Piston on Drive Shaft; using a spanner wrench, turn clockwise
until the measurement in step # 5 is achieved.
28. Install Jam Nut, using Lock-Tite and tighten.
29. Install Actuator Top and tighten screws.
30. Install Actuator Cover and tighten screws.
31. Install air line and test operation of Valve and Actuator.
Figure 5: BELLOWS
AND ACTUATOR AS-
SEMBLIES
DRAWING
SCREW (6X)
ACTUATOR TOP
JAM NUT
O-RING
O-RING
PISTON
MAGNET
O-RING
ACTUATOR HOUSE
O-RING
REED SW DRIVE SHAFT
WASHER (3X)
R-RING
STEM
BELLOWS - BELLOWS
END FLG
R-RING
0-RING
BEARING
PINS (2X)
O-RING
R-RING