NEMO Equipment MORPHO 2 - Manual (Page 4)

Optional Accessories
1. Spare Bladder: Add a spare welded PU bladder
with inflation/deflation valve to your repair kit for
backcountry travel. In the rare event that you need
to change your airbeam bladder, it will allow you to
quickly swap in the spare without having to check
for leaks or repair pinholes.
2. Spare Nemoid™ Foot Pump: The Nemoid™
Foot Pump is the fastest way to inflate NEMO
AirSupported™ tents, and is included with your
Morpho 2P™ tent. It inflates Morpho 2P™ in 45
seconds and can be stored flat in your tent’s stuff
sack by simply closing the Dump-Check Valve™
before squeezing the air out of the pump.
3. Integrated Pump: The Integrated Pump is the
smallest and lightest way to inflate AirSupported™
tents. The “lung-amplifying” pump features durable
welded construction, a Moisture Release Valve™, and
a Quick-Disconnect Valve for easy airbeam setup.
4. Footprint: The Footprint is a 70D abrasion-
resistant nylon fabric ground sheet perfectly sized
to fit underneath your tent. The fabric is PU coated
for waterproofness. The Footprint reduces wear and
tear on your tent floor from contact with the ground.
5. Pawprint™: The Pawprint™ is a removable liner
perfectly sized to fit inside your tent. It has the dual
function of protecting your tent floor from boots
and paws, and of adding serious comfort. The
Pawprint™ is made of a machine-washable brushed
polyester that is very soft to the touch. Place your
sleeping pads between the Pawprint™ and floor to
help them stay in place.
6. Padlock™: Morpho 2P™ Padlocks™ are a simple
strap system to keep your sleeping pads secured
in place while you sleep. The straps attach to your
tent and use a tensioning system to lock your pads
in place. No more worrying that you will wake up
on the cold ground because your sleeping pad has
slipped from under you in the night. Use with the
Morpho 2P™ Pawprint™ for a comfortable night
without wandering pads. Adjustable to fit sleeping
pads from 0-54".