Mossberg FLEX System Shotguns User Manual

Page 11

PART N0. 100848 REV. A

TO ATTACH RECOIL PAD

Before making any recoil pad changes, move the safety button fully
rearward to the “ON” (SAFE) position and visually and physically check
the chamber, elevator, and magazine tube to be certain the shotgun is
unloaded. Also, be sure to keep the action open and the muzzle pointed
in a safe direction. Refer to your firearm’s owner’s manual for additional
safety and functional information.

Identify the bosses on the recoil pad (Fig. 21) and the pear-shaped holes in the
recoil pad release lever (Fig. 22).

RELEASE

BOSSES PEAR-SHAPED HOLES

LEVER

Fig. 21 Fig. 22

Push bosses on recoil pad through the pear-shaped holes in recoil pad release
lever (Figs 23 & 24). Push the pad towards the top of the stock and in until the
release lever audibly clicks into place. Tug and twist the pad to ensure it is properly
seated and perform

a function test per instructions in your firearm’s owner’s

manual.

Fig. 23

Fig. 24