Digital Spectrum 1862-MF-61-7 User Manual

Page 8

Page 2

4. Getting Started

The following sections provide step-by-step instructions on setting up a
MemoryFrame for the first time.

4.1 Unpacking a

MemoryFrame

The MemoryFrame unit is wrapped in a cardboard shock-absorbent
holder. Remove the entire cardboard shock-absorbent holder from the
box, and unfold the cardboard so that it lies flat. Gently slide the
MemoryFrame from out of the “shrink-wrap” material.

4.2 Product Serial Number & Registration

Please record the model and serial number from the bar coded label
located on the rear of the MemoryFrame, as shown in Figure 1, for
reference. The serial number is required for Technical Support and
Product Registration.

Figure 1 – Product Serial Number Label

In order to receive one year of free technical support, The MemoryFrame
must be registered. MemoryFrame can be registered online at:

http://www.dsicentral.com/register

or fill-out and mail the included mail-

in registration card.

4.3 Removing the Protective Cover from the LCD

The MemoryFrame ships with a protective plastic cover over the LCD
screen to prevent the screen from being scratched or damaged during
shipment. It is easy to remove, and reusable.

Page 51

8. When the slideshow begins after the boot, you can reconnect the USB

cable.

9. Transfer your desired pictures from either camera, USB thumb-drive,

card-reader, or PC

16.

MemoryFrame Specifications

Screen Type/Size:

Bright 10.4” Active Matrix TFT LCD

Camera Interface:

USB 1.1 Host interface – USB Certified

# of images stored:

80 images max. Less with audio clips attached.

Image File Format: JPEG on Camera and USB storage peripheral.

JPEG, TIFF, PNG, GIF, and BMP on PC

Resolution:

800 x 600 (larger images are automatically scaled to
fit the screen)

Onboard Memory:

32MB RAM. 20MB Flash memory

PC Interface:

USB 1.1 Target interface

Monitor Output:

VGA D-sub 15 pin

Audio Jack:

Stereo audio jack 3.5mm

Audio Format:

WAV

AC Adapter:

North America: 120 VAC, 60 Hz, 17w

Europe: 220-240 VAC, 50 Hz, 17w

Output = 12VDC @ 2.0A

Dimensions:

10 x 11.75 x 2 in

(254 x 298 x 51 mm) (w/h/d)

Weight/Mass:

62 oz. (1761g)

Environment:

32 – 85

F, 0-30

30-80% RH (non-condensing)