LW Measurements BWS NTEP Weighing Platform Scale 500lb - Manual (Page 13)

BW/BWS Series Indicator Technical Manual
- 10 -
and beeper will be sounded.

Check mode ng : When the weight is out of the limits, the beeper will be
sounded and OK will shown.
Note: Check weighing available only when weight more than 20d
5.3. Accumulation
The scale can be set to accumulate manually by pressing key. For settings,
see the parameter p 1 Com » mode » pr 2
Before operation scale should be stable and return to zero, accumulation
available only when weight more than 20d
Accumulation Operation

Place the load on the platform.

Press key, when displayed STABLE indication.

Display will be show acc 1 then will be show the total saved value.
These displays will be shown only three seconds.

Remove the weight from the pan.

When display get zero and stable then place the second weight.

It can continue until the memory gets fully or 99 items.
5.3.1 Memory Recall
To recall the memory press key.
Display will be show
acc X (X: Total number of accumulation) then will be show
the total saved value. These displays will be shown only three seconds.
5.3.2. Memory Clear
To clear the memory, press and keys together.
Display will be show
Acc 0 , all accumulation memory cleared from the memory.
5.3.3. Automatically accumulation.