dbx Pro QUANTUM - Manual (Page 67)

®
Application Guide
Section 6
QUANTUM
57
®
QUANTUM User Manual
Hardware
1. Connect the analog console’s outputs to the QUANTUM’s analog inputs.
2. Connect the QUANTUM’s analog outputs to the recorder.
Software
1. Press the UTILITY button to enter the QUANTUM’s utility section. Change the INPUT to
ANALOG.
2. Change the CLOCK INT96.
3. Press the NORM/OUTPUT button twice. This accesses the dither and noise shaping of the
output module.
4. Set Bits to 24.
5. Choose which type of dither you would like to use (refer to Section 4.16).
6. Choose which type of noise shaping you would like to use (refer to Section 4.16).
7. Press the NEXT PAGE button to scroll to next set of options.
8. Set Dither Out to All.
9. Press OTHER button to access TYPE IV™ conversion system (refer to Appendix B).
10. Press STORE if you wish to save non-utility changes (refer to Section 3.4)
6.6 Analog Mixing