Luxul XGS-1024S - Manual (Page 4)

Quick Install Guide XGS-1024S
14203 Minuteman Drive, Ste 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-QIG-XGS-1024S 0829140309
4
The following chart shows the LED indicators of the XGS-1024S along with an
explanation of the indicator’s properties:
LED Status Description
Power LED ON This indicator lights up when the XGS-1024S is
properly powered.
OFF If this indicator is not lit, please check the AC
power cord to ensure proper connection to the
outlet and the XGS-1024S.
Link/Activity ON Indicates a device is connected to the port of the
XGS-1024S
Blinking Indicates the port is transmitting or
receiving data.
OFF Indicates the port is not connected to
a device.
Speed ON Indicates the XGS-1024S is connected to the
device at 1000Mbps.
OFF Indicates no device connected or the connected
device does not support 1000Mbs and is con-
nected at something less than 1000Mbs.
Rear Panel Layout
The rear panel has one AC power port and one grounding terminal.
NOTE: If the Switch is installed in a location where a ground connection
is available, the grounding terminal can be used to connect the
switch to ground.
100-240V
-50/60Hz 0.5A
CAUTION: Please use the correct power cord for your environment. If
any voltage other than 100/240 is applied, it will result in
damage to the XGS-1024S.