Luxul XBR-4400 - Manual (Page 8)

Information on this document supersedes all previous versions. Products and documents
subject to change without notice. Products may be discontinued without notice.
LUX-QIG-XBR-4400
029151011 a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685
luxul.com | 801-822-5450
„ DO NOT pull any connected cable with force. When disconnecting cables, do so by disconnecting first
from the XBR-4400. When reconnecting, connect the XBR-4400 first and then the Power/data source.
„ Verify there is adequate ventilation around the device, and that ambient temperatures meet equipment
operation specifications.
„ The XBR-4400 is designed for indoor use only. DO NOT place this outdoors.
„ DO NOT install in or near hot or humid places, such as a kitchen or bathroom. Take care to minimize
exposure to excessive heat or moisture.
„ Small parts and plastic bags used for packaging may be harmful to small children. KEEP All
ACCESSORIES OUT OF THE REACH OF CHILDREN!
„ The XBR-4400 may become hot when in use for extended time periods. This is normal and is not a
malfunction. DO NOT install where it will be exposed to paper, cloth or other flammable materials.
„ The XBR-4400 contains no user-serviceable parts. If it is not working properly, contact your dealer and
ask for help. DO NOT attempt to disassemble the device.
REGULATORY COMPLIANCE
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
This device complies with part 15 of the FCC Rules.
Hereby, Luxul, 14203 Minuteman Drive, Suite 201, Draper, Utah, 84020, declares that this
Luxul XBR-4400 is in compliance with the essential requirements and other relevant provi-
sions of Directive 1999/5/EC.
For a copy of this report send a self addressed stamped envelope to:
Luxul CE, 14203 Minuteman Drive, Suite 201, Draper, Utah, 84020.
Industry Canada
CAN ICES-3(B)/NMB-3(B)