Simply connected, Package contents, Hardware description – Luxul XBR-4400 User Manual
Page 3: Front panel, Led indicators

Simply Connected
© 2015 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
3
PACKAGE CONTENTS
The following items should be included in the box:
XBR-4400 Commercial Grade Multi-WAN Gigabit Router
Power Cord
Two L-shaped rack mounting brackets and screws and four rubber pads
Quick Installation Guide
NOTE: If any of the listed items are missing or damaged, please contact
the reseller from whom you purchased for return/replacement.
HARDWARE DESCRIPTION
Front Panel
XBR-4400 Front Panel View
Factory Reset Button: Used to restore factory default settings.
w
To reset to factory defaults, press and hold the Reset button until the System
LED turns off, (approximately 10 seconds). A factory reset may take approximately
a minute to complete. A successful factory reset is indicated by all of the Port
LEDs fl ashing once. When the System LED turns on the unit is ready.
NOTE: To hard reset the router use the power switch. Turn the router
off, wait 5 seconds and turn the unit back on.
CAUTION: Resetting the XBR-4400 to factory defaults will remove all
custom settings.
LED Indicators
Indicator
Description
Function
POWER
Power LED
ON indicates the XBR-4400 has power.