Lingenfelter L710660504 Lingenfelter Pontiac GTO Fuel Pump 2003-2006 v4.41 - Manual (Page 9)

29. Using a brass or similar non-sparking
flat-end punch and a hammer, gently tap the
fuel-pump module retaining ring counter-
clockwise to release it, and remove (or use
GM tool J45722 if available)
30. Pull the module halfway out and remove
the fuel module outlet hose from under
the top of the module. NOTE: Fuel will be
present after removal- take care to keep heat
sources away from the area.
31. While the module is still halfway out
of the tank, disconnect the fuel-pump out-
let hose from inside the tank. Remove the
module. Remove the fuel pump module seal
(O-ring). You will be replacing this seal with
the new seal provided with the kit.
32. Unclip the fuel level float arm from its
black plastic bracket by holding the bracket
down while gently pulling up on the arm.
Remove both pieces from the assembly
by pulling the bent tang of the fuel level
float arm out of the fuel pump module then
sliding the black plastic bracket upwards.
TAKE GREAT CARE NOT TO BEND THE
FUEL LEVEL FLOAT ARM OR BRASS
CONTACT TIPS ON THE BRACKET, AS
THIS WILL UPSET THE PRECISION OF
THE FUEL LEVEL GAUGE.
Page 8 of 17