LG Motorsports Track Box for C6, New Design - Manual (Page 6)

4. There are three connectors and a fuse panel in the BCM. (Figure 5) The blue shrouded connector in
the upper right hand corner of the BCM (circled) needs to be removed to gain access to the wiring.
Figure 5
5. Unplug this connector by rotating the grey clip upward. You may need to pry the middle of it gently
with a screwdriver to allow it to release. Remove the blue shroud from the connector to expose the
wires.
6. Locate the “tan” and “tan/black stripe” wires from this connector. Important: There are multiple
tan wires in this connector. Make sure that you locate the four wires in location 1 and 2 (Tan/Blk),
19 and 20 (Tan), shown in Figure 6.