Laerdal SimPad SkillReporter User Manual

Page 9

Connect

SET UP AND SELECT NETWORK

If you have selected more than one manikin (BLS Instructor), you are prompted to

choose a network. The network enables communication between several manikins and

SimPad. We recommend that you use the Laerdal Router (purchased separately) to

establish the network.

LAERDAL ROUTER

Let the router start up completely (approx. 2 minutes) before starting up SimPad and

the manikins. Also make sure the router switch is set to Router or AP, not Client. For

optimal performance, place the router above floor level. Do not reset or otherwise

change the router (i.e. password, configuration etc). To reboot, simply disconnect and

reconnect the power. To power the router, use only the included USB power supply

(5V). Using the SimPad power supply (12V) may cause permanent damage to the

router. A network from a Laerdal Router is listed as LaerdalNetMobile.

Router switch

Reset button (do not use)

Power connector