Laerdal SimPad SkillReporter - Manual (Page 10)

10
Connect
3
EDIT MANIKIN NAME
The default manikin name is Resusci Anne or Resusci Baby. To keep track of multiple
manikins, give each one a unique name.
TIP: Switch on one manikin at the time and tap Edit name when the manikin appears
on the screen. Type a new name and put a corresponding name tag on the manikin.
Repeat this process for every new manikin.
Edit name
CAN’T FIND A MANIKIN?
If the manikin you want to use doesn’t appear on the list, make sure the manikin is
switched on and in WiFi mode, indicated by the green WiFi symbol on the control
panel on the manikin. Be patient - it might take up to 15 seconds to identify the
manikin. If the manikin still doesn’t appear, it may be connected to a different network
than SimPad. To make it available for selection, press and hold the manikin’s toggle
button. After two seconds a beep confirms that the manikin is reset. About 15 seconds
later the manikin appears on the list.
Connection problems may occur in areas with e.g. high WiFi traffic.
The most reliable connection for single manikin use is the USB cable. A cable connect-
ed manikin appears in the manikin list as preselected and connected.
Tap here to access the
manikin selection and
available networks.
Number of manikins
connected