Labconco Protector Filtered Glove Box - Manual (Page 56)

Chapter 7: Accessorizing Your Glove Box
Product Service 1-800-522-7658 52
Part # Descriptions
7995600 Ammonia Trap Insert
5244100 Flowmeter, Visual
5240100 Gas & Vacuum 0.2 Micron Filter
23. Polycarbonate Viewing Window with Frame (Part #5066700)
Polycarbonate window, for those users that prefer polycarbonate over
the standard laminated safety glass (includes metal frame).
24. Interior Glove Port Cover (Part #5060400)
Quickly seals glove box should sudden leak occur due to glove
damage. Stainless steel with molded rubber gasket and spring-loaded
latches with adjustable closure knob.
25. Interior Shelves (Part #5061600)
Provide shelf space across back wall of glove box interior. Three
stainless steel storage shelves are attached to epoxy-coated steel
upright supports. Shelves have adjustable height and measure 30"
wide x 6" deep. Installation hardware and instructions included.
26. Gloves (see Appendix A: Replacement Part numbers for other
glove sizes and material types)
Neoprene gloves are the most resistant to abrasion and tearing. Butyl
gloves provide higher impermeability and improved dexterity.
Hypalon gloves are made with a mixture of neoprene and butyl rubber
to provide an intermediate level of neoprene and butyl features.
27. External Glove Port Covers (Part #5242200)
Cap and clamp attaches to the glove ports to eliminate glove inflation
during purging and filling operations and reduce the cycle time of the
purging/filling process. Set of two.
28. Left side Sealed Electrical Plug Kit (see Part #’s below)
Part # Descriptions
5075622 115V single outlet
5075623 230V IEC single outlet
29. DOP Test Kit for Filters (Part #5242400)
Includes the connections and hoses to carry out the Filter Leak Test
documented in Chapter 6 of this manual.
30. Drying Train Tubing Kit
Includes the (FEP) tubing and plumbing fittings for connecting typical
moisture, and other gas fume removal components (see item 23
above). Fluorinated ethylene-propylene (FEP) tubing has very low
moisture absorption.
Part # Descriptions
5242500 Drying Train Tubing Kit; Moisture, Solvents,
and Radioisotopes