Labconco Precise HEPA-Filtered Glove Boxes 5220231 - Manual (Page 42)

Chapter 7: Accessorizing Your Glove Box
Product Service 1-800-522-7658 38
20. Remote Blowers
Has a 1/4 hp direct drive motor and corrosion-resistant epoxy-coated
steel housing and wheel with blower inlet of 6.00" ID. Outlet
dimensions are 4.25" x 7.38" OD.
CFM @ Static Pressure-Inches of H
2
O
S.P. 0.0" 0.125" 0.25" 0.50" 0.75" 0.87"
CFM
595 560 515 420 300 167
Part # Description
4863500 Remote Blower, 115 V, 60 Hz. 4.4 amps
4863501 Remote Blower, 115/230 V, 50 Hz, 5.6/2.8 amps
Figure 7-1
All dimensions in inches
21. Positive Pressure Conversion Kit (Part #5236900)
Converts integral glove box blower from negative pressure operation
to positive pressure.
22. Recirculation Kit (Part #5236500)
Allows the blower exhaust to be connected to the HEPA inlet filter
for recirculation of the exhaust air. Useful with drying train
components on the main chamber.
23. Filtration Components for Moisture and Fume Removal
The following components are useful in removing organics, acids,
ammonia, moisture, and other gases as indicated. They are connected
to the glove box using the #5225701 Add-A-Valve Kit.
Part # Descriptions
5248200 Vacuum Pump for Circulation, 115V, 60 Hz w/switch
5248201 Vacuum Pump for Circulation, 230V, 50 Hz
7815301 Canister with Stand for Traps
7815200 Moisture & Solvent Trap Insert (molecular sieve)
7814800 Acid Vapor Trap Insert
7815000 Radioisotope Trap Insert