Labconco FlaskScrubber Vantage Series Glassware Washers 4540031 - Manual (Page 25)

Chapter 3: Getting Started
Product Service 1-800-522-7658 21
3.
Install the tube and level switch into the full container and reattach the cap.
4.
There are two methods which can be followed for filling the system with
detergent and neutralizing acid rinse.
Method 1: Run a wash cycle with no glassware in the washer. Set the detergent
dispense rate to 30 ml and the rinse aid dispense to 6 ml.
Method 2: Run a diagnostics test. When the display window shows DETERGENT
PUMP allow the pump to run for 30 seconds. When the display shows
RINSE AID PUMP, allow the pump to run one minute.