Konig Electronic Digital 2.4 GHz wireless camera for SEC-TRANS60 - Manual (Page 2)

2
ENGLISH
Introduction:
Watch over your properties with this new 2.4 GHz digital wireless security camera system. The
7” LCD monitor can support up to 4 cameras and has an integrated digital video recorder.
The camera offers a very sharp and stable image with night vision and the technology used
improves the image quality even further. The system uses digital wireless technology and is
equipped with advanced frequency signal encryption capabilities, which reduce interference
caused by other applications using the 2.4 GHz frequency band. This digital technology
ensures your privacy and allows you to use it over an extra long distance. THE BEST THAT
WIRELESS HAS TO OFFER.
The monitor and camera are paired by factory default already. When adding the additional
camera SAS-TRCAM40/U (4 cameras max.) to the system, please refer to the section PAIRING
for adding cameras.
• We recommend that you read this manual before installing/using the camera system.
• Keep this manual in a safe place for future reference.
Packaging content:
1x camera with bracket
1x 7” monitor
2x antenna
1x AV output cable
2x AC/DC power supply
Technical specifications:
Camera:
Transmitting frequency: 2.4-2.4835 GHz Digital
Modulation: 16QAM, QPSK, BPSK
Range: Indoor ±50 m, open area ±150 m (depending on local
conditions)
Image chip: 1/4” CMOS
Lens: 2.0mm
View angle: 73°
Infrared illumination (LED): 5 M
Protection: IP54
Microphone: mono
Working temperature: -10°C ~ 50°C
Voltage: 5 V DC/400 mA
Dimensions: 132x64x57mm (without bracket)
Weight: 287 g (included cable)
LCD monitor:
Receiving frequency: 2.4-2.4835 GHz Digital
Channels: 4