Konig Electronic Full HD car camera - Manual (Page 4)

4
English
Video mode
Symbols
Video mode File protection
Battery indicator Loop recording
Connection to the car
charger
Infrared lamp indicator
Motion detection Microphone indicator
Exposure Operation indicator
Memory card:
microSD / TransFlash
Menu
VIDEO
Resolution
1080FDH (1920x1080) / 1080P (1440x1080) /
720P (1280x720) / WVGA (848x480) /
VGA (640x480) / QVGA (320x240)
Loop Recording Off / 3 Minutes / 5 Minutes/ 10 Minutes
Exposure
+2.0 / +5/3 / +4/3 / +1.0 / +2/3 / +0.0 /
-1/3 / -2/3 / -1.0 / -4/3 / -5/3 / -2.0
Motion Detection Off / On
Record Audio Off / On
Date Stamp Off / On
G-Sensor Off / Low / Medium / High
SETUP
Card Info Name / Size / Free (Memory)
Date / Time Date / Time
Auto Power Off Off / On
Beep Sound Off / On
Language
English / French / Spanish / German / Italian /
Simplified Chinese / Traditional Chinese / Russian /
Japanese
TV Mode PAL / NTSC
Frequency 50 Hz / 60 Hz
Lamp Setting Off / On
Image Rotation Off / On
Backlight Off / 1 Minute / 2 Minutes / 3 Minutes / 5 Minutes
Format Cancel / OK
Default Setting Cancel / OK
Version Software version
To record videos:
1. Insert a memory card into the memory card slot.
2. Insert the USB connector of the car charger into the USB
connection of the device. Connect the car charger to the car
charger connection of your vehicle.
3. Mount the device to the windscreen using the windscreen
mount.
4. Switch on the device.
5. Set the video mode.
6. Set the correct settings using the menu.
7. Record the video.
Playback mode
Menu
Delete Delete Current / Delete All
Protect Lock current / Unlock current / Lock all / Unlock all
Slide Show 2 / 5 / 8
To play back photos or videos:
1. Switch on the device.
2. Set the playback mode.
3. Play back the photos or the videos.
Reset button
To reset the device, use a small needle or a paper clip to press and
hold the reset button for 3 seconds.
Computer camera
To use the device as a computer camera, connect the device to the
computer using a USB cable.