Konig Electronic Dummy indoor camera - Manual (Page 2)

2
ENGLISH
CCTV DUMMY CAMERA
Introduction:
CCTV dummy camera with (fake) auto iris lens. Professional design for the image of security. With
built-in flashing LED. Mounting bracket included.
• We recommend you read this manual before installing/using this product.
• Keep this manual in a safe place for future reference.
Packaging content:
• CCTV dummy camera
• Mounting screws and plugs
• Manual
Specifications:
• Housing: plastic
• IP protection: Indoor use
• Battery:
2 x 1.5V AAA battery (not included)
• Dimensions: 155 x 50 x 54 mm (without bracket)
• Weight: 167 g (without batteries)
Insert the batteries to activate the flashing LED:
1. Remove the battery compartment at the
backside of the camera.
2. Insert 2x AAA 1.5V batteries into the
battery compartment and correctly
match the polarity markings (+ and -),
to activate the flashing LED.
Close the battery compartment after
inserting the batteries.
Maintenance:
Clean the housing with a dry or damp cloth.
Do not use cleaning solvents or abrasives.